Honda Passport Forum banner
Cancel

Zulk44 Build

Jump to Latest Follow
1 - 20 of 23 Posts
helicopterpeople

· Registered
Passport Sport AWD
Joined
·
171 Posts
#2 ·
Zulk44 said:
So started my build off today on my 2019 AWD Touring, I picked up some 18x8 2019 Ridgeline black wheels. Then added some 265/60/18 Continental AT to top it off. I have the 2" lift and trailer hitch coming next week and the Jsport safari bumper is 2 weeks out. I will add the crossbars later today.
View attachment 9225
Click to expand...
Noice! 💪💪
Those ridgeline rims are a rare find nowadays.


P.s. Dont forget to add the K&N filter decal sticker in the rear glass for an optimal additional of 45+ HP. Lol.
 
Zulk44

· Registered
Joined
·
30 Posts
Discussion Starter · #4 ·
So the trailer hitch came in early and I really tried not to take the bumper off. But after trying for 45min I couldn't get my hands ( I'm 6'5" 250) into the little space to remove the top two bolts, so off she came. Its was actually really easy and probably only took me about 25min to remove. Once off super easy and then put it all back with no issues. Hitch itself was simple, after all only six bolts. The crossbars will be in tomorrow.
9281

9282
 
PNWGarageDad

· Registered
2019 White Diamond Pearl , AWD Sport
Joined
·
982 Posts
#9 ·
Awesome , I look forward to seeing some good pictures of the Jsport bumper. Also wondering if any kind of tow hook could be mounted to that bumper.
 
Save Share
Reply Quote
sprocket

· Registered
Joined
·
97 Posts
#16 ·
Zulk44 said:
Ok, so I just got her back from the shop and the Jsport Bar has been added
Click to expand...
Zulk44, I've been looking at the Safari Bar in order to add additional driving/fog lights. Can you provide some additional pictures and dimensions?
1) Distance between top of bar and bottom of license plate.
2) From a side view, distance between bar and front of grill (and also between bar and license plate).

I'm also curious how sturdy these bars are, I know you can't push/pull another vehicle with one, but could you at least stand on it with full body weight?

Thanks, it looks great!
 
Zulk44

· Registered
Joined
·
30 Posts
Discussion Starter · #17 ·
sprocket said:
Zulk44, I've been looking at the Safari Bar in order to add additional driving/fog lights. Can you provide some additional pictures and dimensions?
1) Distance between top of bar and bottom of license plate.
2) From a side view, distance between bar and front of grill (and also between bar and license plate).

I'm also curious how sturdy these bars are, I know you can't push/pull another vehicle with one, but could you at least stand on it with full body weight?

Thanks, it looks great!
Click to expand...
We are on vacation with it right now so I don’t have anything to measure what you asked for. When we get home on Sunday I will grab some pictures and measurements for you. I can stand on it with no issues, it is really sturdy and bolts into the frame. The only issue I had is that the bolt holes where a little off so I had to take it down to my local shop to have them put it on. Also it needs to be torqued down to 85-90 lbs per Adam at Jsport.
 
1 - 20 of 23 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
About this Discussion
22 Replies
8 Participants
Last post:
kslu_wa
Honda Passport Forum
Honda Passport Forum is the Largest 2019+ Passport SUV community & owner’s club. Your passport to adventure!
Full Forum Listing
Explore Our Forums
Honda Passport General Discussion Forum Honda Passport Complaints, Issues And Problems Wheel And Tires New Member Introductions What Did You Do To Your Honda Passport Today?
Top