[tlondon72]

Has anyone replaced the clear plastic front of their instrument cluster, it seems to scratch so easily. I want to buy a new one, put a protector on it and then install it. Does anyone have instruction to take apart the drivers side dash to do this?

 

[CHEFERMAN65]

Welcome, can't say as if I have, ever, on any vehicle. It shouldn't scratch very easily or let me say during normal cleaning it shouldn't. Unless that is you already did... It's probably one piece. You'll have to dig in a bit into a service manual and look at the actual cluster to determine if it is indeed a removal/replaceable part. As far as protecting it, what would you be protecting it from? A micro fiber towel with some quality plastic polish, such as Plexus? Seriously.

 

[Blue jean]

All the Honda’s I’ve worked on, start by removing the side garnish, pops off with some strength, then lower garnish and then around the cluster, then you’ll be able to remove the dash. Same procedure as changing a blown bulb in the dash...... google that....
Hope this helps ....
Good luck....

 

[Toomas]

Has anyone replaced the clear plastic front of their instrument cluster, it seems to scratch so easily. I want to buy a new one, put a protector on it and then install it. Does anyone have instruction to take apart the drivers side dash to do this?

 

[Toomas]

I put the clear plastic on mine, reality is that it will get scratched and this will protect for a few years and then just replace like on a phone. I got it on amazon. I recommend to only use the microfiber towel all parts of the dash, I found event a good clean 100% cotton can leave swirl marks on the black plastic so I never clean with anything but the micro.