Honda Passport Forum banner

My custom painted Honda hitch cover.

2125 Views 5 Replies 4 Participants Last post by  DesertRoads
1. Spay paint a clean shop rag laid out on a box.
2. Carefully dab Honda H, allow to dry.
3. Clear coat with 3 coats.
  • Like
Reactions: 4
1 - 2 of 6 Posts
Easy solution, drilled a hole through the top and bottom of the hitch cover rubber.
Install large zip tie with a small loop.
Fish another zip tie through the receiver pin hole.
Yes, you can just cut the zip tie with side cutters but at least it might keep an easy theft from happening.
1 - 2 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.