[Mypassport]

Hi fellow passport owners.
I have been thinking about getting my car fitted with running boards. Wondering if anyone has any insight on fitting Honda pilot running a boards on the Honda passport since the wheel base is basically same.

Could be that I am missing something but please enlighten.
Thank you.

 

[helicopterpeople]

I did numerous hours of research and even called up few dealerships and couldn't get/ find a definite answer.
Therefore, I purchased the OEM passport running boards and installed it myself, took less than 30 minutes.
I am also curious what others might have to say about this.....

 

[QCEng1]

Check a couple of sellers of OEM parts (Bernardi or CollegeHill) and compare part numbers of each. If they’re different, they won’t interchange.

 

[HarveyW]

When you look at the 2019-2021 Passport die cast running boards, Part # 08L33-TGS-100F, with the similar 2019-2021 Pilot die cast running boards, Part # 08L33-TG7-100F, they look the same, they cost the same but have different part numbers. I suspect that is due to the bolt hole locations being different.

 

[Mypassport]

Not sure if anyone cares but honda pilot running boards did fit my passport exl no issues. Link for the part is below $150 with tax only of you care.

https://www.amazon.com/dp/B07YCW36BR?psc=1&ref=ppx_pop_dt_b_asin_image

No cuts or adjustments required.

 

[helicopterpeople]

Not sure if anyone cares but honda pilot running boards did fit my passport exl no issues. Link for the part is below $150 with tax only of you care.

https://www.amazon.com/dp/B07YCW36BR?psc=1&ref=ppx_pop_dt_b_asin_image

No cuts or adjustments required. View attachment 9659

 

[Hubb]

Not sure if anyone cares but honda pilot running boards did fit my passport exl no issues. Link for the part is below $150 with tax only of you care.

https://www.amazon.com/dp/B07YCW36BR?psc=1&ref=ppx_pop_dt_b_asin_image

No cuts or adjustments required. View attachment 9659

Are yours just black? The ones in the link you posted look like they have a satin or brushed aluminum finish.

 

[Mypassport]

No, mine are brushed aluminum finish as well, in the picture it just seems Grey due to the shadow. However, the color wasn't my highest priority compared to cost savings and functionality. I shall try and update the post with the actual picture during the day tomorrow.

 

[PNWGarageDad]

Not sure if anyone cares but honda pilot running boards did fit my passport exl no issues. Link for the part is below $150 with tax only of you care.

https://www.amazon.com/dp/B07YCW36BR?psc=1&ref=ppx_pop_dt_b_asin_image

No cuts or adjustments required. View attachment 9659

Boom! Installed while wearing flip flops! Running boards look great!

 

[HarveyW]

Not sure if anyone cares but honda pilot running boards did fit my passport exl no issues. Link for the part is below $150 with tax only of you care.
https://www.amazon.com/dp/B07YCW36BR?psc=1&ref=ppx_pop_dt_b_asin_image
No cuts or adjustments required.

Good to know. Thanks for being the test owner.

 

[Mypassport]

And I must say, it was an easy install.

 

[Mypassport]

Pictures are attached showing the color. Goes ok with the gray wheels imo.

 

[Mypassport]

 

[Hubb]

Pictures are attached showing the color. Goes ok with the gray wheels imo. View attachment 9684

Ok, you've convinced me. I'm going to order some tomorrow.

 

[Mypassport]

Ok, you've convinced me. I'm going to order some tomorrow.

Cool, do post some pictures after you install and good luck.

Remember If you don't like anything it's free returns.

 

[cohocarl]

When you look at the 2019-2021 Passport die cast running boards, Part # 08L33-TGS-100F, with the similar 2019-2021 Pilot die cast running boards, Part # 08L33-TG7-100F, they look the same, they cost the same but have different part numbers. I suspect that is due to the bolt hole locations being different.

One has "Passport", and one has "Pilot" cast into it so they would need different #'s. I was wondering if Ridgeline boards would fit the Passport...

 

[ChucklesToy]

One has "Passport", and one has "Pilot" cast into it so they would need different #'s. I was wondering if Ridgeline boards would fit the Passport...

If I remember correctly, the cast Ridgeline running boards also has 'Ridgeline" cast into it; there is another one which does not (the non-lighted one does not).

 

[cohocarl]

I was just thinking there are more aftermarket boards for the Ridgeline than the Pilot or Passport, and the possibility if they would fit. Same wheelbase, same platform, etc.

*edited- I thought the Ridgeline had the same wheelbase but it is longer than the Pilot & Passport. My bad.

 

[mikkadim]

Not sure if anyone cares but honda pilot running boards did fit my passport exl no issues. Link for the part is below $150 with tax only of you care.

http://[URL]https://www.amazon.com/dp/B07YCW36BR?psc=1&ref=ppx_pop_dt_b_asin_image

[/URL]

No cuts or adjustments required. View attachment 9659

what wheel locks did you use? Looks great and small, McGard's seems too big

 

[ChucklesToy]

what wheel locks did you use? Looks great and small, McGard's seems too big

The Honda OEM wheel locks are made by McGard.