Honda Passport Forum banner

Bumper Sag- what’s this part?

2216 Views 6 Replies 4 Participants Last post by  SoldierDaddy
Hello! New passport owner here. I have a 2019 Passport elite. There is a bit of damage to the rear unpainted number near the reverse light- not bothered too much by that- but the rear bumper on the drivers side also sags ever so slightly. I took my bumper off to take a look at the issue (and repair my kick sensor) to find this little black bracket that is a bit loose. It has white clips with a Philip’s head pattern and I’m not really sure what they are or how they work. Any help would be appreciated so I can get the bumper lifted back up.
See less See more
1 - 1 of 7 Posts
That part is the left rear bumper spacer (number 10 in the picture attached), I'm not sure if its different in US but in Canada you cant buy the clips alone you have to buy the entire bracket which is $12.62 CAD


1 - 1 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.