Gives the Passport a whole new look.

 

Not bad not bad. I dig it.

 

I do love fat tires. Very nice.

 

Looks good. You're gonna want to keep mall crawling on those rubber bands though.

 

I was thinking the same thing. $300 is a steal. To clarify, the front wheels did not clear the calipers, correct? So you put spacers on only the front wheels, correct? Rear was okay?

Looks amazing by the way.

 

yes front didn’t clear you will need at least 5mm spacers or what I did is I grind the front brake caliper bracket a little to clear the wheels as I took off the wheel spacers cause wife didn’t like the flush look. Rear wheels cleared but I did install spacers to match

Sample pics of with and without spacers

 

They look ok to me,

Do you have a pic of the stock wheels?

 

They look ok to me,

Do you have a pic of the stock wheels?

just boring looking stocks here

 

I had those same Touring wheels, I thought they looked ok, I just wanted 18's and AT tires.

One other thing is, I bet cleaning in between 5 spokes was a bit easier than 7 spokes, my dang BMW had 14 spokes, which meant trying to clean 28 spaces...lol

 

The new wheels look good. They go well with the white color of your vehicle.

 

@pnwPp can you post photos of what your modified brake calipers look like now?

 

Sorry too lazy to remove my wheels to take pics. I will once it’s due for tire rotation. But here is a sample pic of the brake caliper the one highlighted in red is where I grind it to clear the ‘24 pilot wheels. But I noticed the part I grind is starting to rust so I may clean it up a bit and spray some caliper paint.

 

I was able ton install 23 Pilot HPD rims with 3mm spacers here. 3mm is just enough and clears securely the calliper.

 

The OP did the same thing but he later removed the spacers and ground down the calipers. I was hoping he can post pictures of the modified calipers.

 

.

 

Let me know if you get pictures. 3mm isnt much honnestly. I dont think i would go that extreme unless it proves to be significantly better.

You are right. I think the issue is the 20mm wheel spacers he used initially, that visibly affected the wheel offset. Your 3mm spacers are just perfect.

 

Can someone post the spacers they used? I am having the same issue.

I am trying to install 2023 Pilot EXL 18” wheels.

 

From the other thread...

"Thank you. Was pretty cheap on amazon. 35$ for the set"

https://www.amazon.ca/dp/B01N8XO1SW?ref=ppx_yo2ov_dt_b_product_details&th=1

 

I confirm this. I have them on my car.

 

Thank you.

I ended up ordering the same 20mm from Bonoss as the original post. Discount Tire didn't want to install using a wheel spacer unless it was a bolt-on spacer. I purchased the wheel and tire off of Facebook Marketplace. They are new off of a 23 Pilot EXL.

Overall, I like the flush wheels/tire to the side of the vehicle, so I think it will look good. Plus, I can purchase their warranty for the tire from them.

 

Photos?

 

How are you liking the 275's now? I was planning on doing the same with Cross Climates.

 

saved my wheels multiple times going over curbs! Loving the 275’s

 

Excellent! Thanks for letting me know 😊

 

Hard to tell at those angles.