Welcome and Congrats...!
2020 Modern Steel Metallic Elite - 1st Honda
Hey everyone. Did alot of research and finally decided to sign on the dotted line for my first ever Brand New Car. I've owned it for a week and loving to so far.
Looking to do some slight mods with tints getting done in the coming weeks.
Looking for some cargo organizer suggestions. Does anyone have any products they can suggest??
Thanks
Looking to do some slight mods with tints getting done in the coming weeks.
Looking for some cargo organizer suggestions. Does anyone have any products they can suggest??
Thanks
1 - 12 of 12 Posts
Welcome and congratulations!
Great choice in color and trim too.
As for storage bins, do you have a Container Store near you? I got three bins that fit across the backside of the seats from there, and then some rubber mats from Walmart with grips on them as they will slide all over.
If you don’t have that store, check out the bins at Target or Walmart type stores near you. Just take a measurement on the space you want to fill.
Great choice in color and trim too.
As for storage bins, do you have a Container Store near you? I got three bins that fit across the backside of the seats from there, and then some rubber mats from Walmart with grips on them as they will slide all over.
If you don’t have that store, check out the bins at Target or Walmart type stores near you. Just take a measurement on the space you want to fill.
Great recommendations. Thank you.
I have the Honda Factory all weather mats and they're good. I'm going to get the Weathertech ones for the front as I don't believe the Honda ones go far enough up in the area of the accelerator and the carpet will take a beating in the wet/snow.
I bought the Honda trunk mat, and bungee net.
I replaced the back up lights with LEDs. Much brighter but the mount is on an angle so the projector part of the ones I bought will be less useful.
I bought aftermarket door sill guards that will help to keep scratches down. Carbon fiber look film. Blends in well with colour.
Just little things.
Now I have to convince someone to do a twin turbo set-up for the V6 and some cat back pipes.
I bought the Honda trunk mat, and bungee net.
I replaced the back up lights with LEDs. Much brighter but the mount is on an angle so the projector part of the ones I bought will be less useful.
I bought aftermarket door sill guards that will help to keep scratches down. Carbon fiber look film. Blends in well with colour.
Just little things.
Now I have to convince someone to do a twin turbo set-up for the V6 and some cat back pipes.
Hey Mike,
Where did you pick up your door still guards? Are they peel and stick?
Any idea how to protect the speakers on the doors from scuffs?
Thanks
Where did you pick up your door still guards? Are they peel and stick?
Any idea how to protect the speakers on the doors from scuffs?
Thanks
Door sill stuff, yes peel and stick, very inexpensive.
I chose these ones: GothYor Youngle 4pcs Carbon Fiber Anti Scratch Car Door Sill Sticker, Universal 3D Carbon Fiber Door Sill Protector Scuff Plate Guard Bumper, Anti Scratch Car Door Stickers(Black). I went with price as my main determinant and I'm a sucker for the carbon fiber look.
If you search in Amazon with "Honda Passport Door sill", you'll get plenty of replies. In fact I may go back and buy this FOSHIO 3D Black Carbon Fiber Vinyl Film Wrap 12" x 60" Sheet with Lockable Utility Knife and Felt Edge Squeegee, Decals, Magnets & Bumper Stickers - Amazon Canada
to do the rear bumper sill and there might be enough material to do the door sills too.
Door speaker grills: 3 possible answers, of which I have done none (1 smart ass, two real possibilities, actually all real I guess, but one is a bit...) My CR-Vs were all scuffed up.
1) Learn to not kick the door on exit.
2) Clear film like the stuff above, but you have to cut out all the tiny holes.
3) Magic eraser will likely get the marks off as long as the plastic isn't abraded.
Mike
I chose these ones: GothYor Youngle 4pcs Carbon Fiber Anti Scratch Car Door Sill Sticker, Universal 3D Carbon Fiber Door Sill Protector Scuff Plate Guard Bumper, Anti Scratch Car Door Stickers(Black). I went with price as my main determinant and I'm a sucker for the carbon fiber look.
If you search in Amazon with "Honda Passport Door sill", you'll get plenty of replies. In fact I may go back and buy this FOSHIO 3D Black Carbon Fiber Vinyl Film Wrap 12" x 60" Sheet with Lockable Utility Knife and Felt Edge Squeegee, Decals, Magnets & Bumper Stickers - Amazon Canada
to do the rear bumper sill and there might be enough material to do the door sills too.
Door speaker grills: 3 possible answers, of which I have done none (1 smart ass, two real possibilities, actually all real I guess, but one is a bit...) My CR-Vs were all scuffed up.
1) Learn to not kick the door on exit.
2) Clear film like the stuff above, but you have to cut out all the tiny holes.
3) Magic eraser will likely get the marks off as long as the plastic isn't abraded.
Mike
Do you have pictures of the carbon fiber installed?
Thanks for the info. Really appreciate it.Door sill stuff, yes peel and stick, very inexpensive.
I chose these ones: GothYor Youngle 4pcs Carbon Fiber Anti Scratch Car Door Sill Sticker, Universal 3D Carbon Fiber Door Sill Protector Scuff Plate Guard Bumper, Anti Scratch Car Door Stickers(Black). I went with price as my main determinant and I'm a sucker for the carbon fiber look.
If you search in Amazon with "Honda Passport Door sill", you'll get plenty of replies. In fact I may go back and buy this FOSHIO 3D Black Carbon Fiber Vinyl Film Wrap 12" x 60" Sheet with Lockable Utility Knife and Felt Edge Squeegee, Decals, Magnets & Bumper Stickers - Amazon Canada
to do the rear bumper sill and there might be enough material to do the door sills too.
Door speaker grills: 3 possible answers, of which I have done none (1 smart ass, two real possibilities, actually all real I guess, but one is a bit...) My CR-Vs were all scuffed up.
1) Learn to not kick the door on exit.
2) Clear film like the stuff above, but you have to cut out all the tiny holes.
3) Magic eraser will likely get the marks off as long as the plastic isn't abraded.
Mike
Welcone. Nice color choice!
Not yet, but I will later and show. Same with Weathertech front mats.Do you have pictures of the carbon fiber installed?
Congrats... Welcome to the MSM and PPE club.
1 - 12 of 12 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Honda Passport Forum
Honda Passport Forum is the Largest 2019+ Passport SUV community & owner’s club. Your passport to adventure!
Full Forum Listing
Recommended Communities
